ACS-Tech80's High Performance Motion Controller

Multi-Processor( Up to four DSP and a Intel CPU) distributed architecture

　

Nanometer Positioning Perfromance : High Precision Motion Control

- Compatible with Laser NanoScale & NanoGrid of Optra Inc for nanometer sensing

- sin-cos encoder support (multiplier up to x16,384 ) : Netzer Precision Motion Ltd.

　

The world's fast Sampling rate (or closed-loop servo rate)

- The world's fast 20kHz sampling time(or rate) (by virtue of multi-DSP and a CPU)
- Sampling time is critical and very important to control motion in fast and Nano-precision
- SPii & SB series	: 50 micro-second(20kHz) independent of number of axes !

　

A lot of Applications : From industrial application to Nanometer control

- From nuclear medical imaging to high-speed wire bonding and nano position control

New! SPiiPlus series : High performance motion controllers ( for more information) SPiiPlus Selection Guide (PDF format) SPiiPlus   1-8 Axes, PCI, RS-232, Ethernet, Stand-Alone Max. 4 DSP(120MHz) and a Intel Pentium CPU(166~400MHz) Servo/Step/Linear and Piezo-Ceramic motor Control PCI-Bus, RS232(2 port), Ethernet Communications    - Simultaneous communications through all channels is fully       supported. The SPiiPlus supports all common motor-drive interfaces   - pluse & direction for traditional stepper servo drives.   - +/-10V analog for velocity and torque mode drives. SPiiPlus CM : Control module with power supply, drive and motion controller   SPiiPlus CM Stand-alone with 1-3, 5 or 10A Servo Brushless or DC Brush Digital Drives, Serial, Ethernet and 1-7 Axes of Remote Motion Control HSSI-IO16 : Digital I/O Expension Module for SPiiPlus PCI & CM     HSSI-IO16 Distributed I/O Expansion Module 　 HSSI High-Speed Sychronous Serial Interface module for expansion of I/O interface.  HSSI-ED2 : Distributed 2-Axis Motor Control Module for SPiiPlus PCI & CM   HSSI-ED2 Distributed 2-Axes Motor Control Module 　 HSSI HSSI 2-Axis Distributed Interface module for remote motor control.  Intelligent controller : High performance, low cost ( for more information ) 　 SB214PC    SB214PC ISA, AC/DC/BLDC Servo, 2-4 Axes, SB214SA    SB214SA Stand-alone, Serial, AC/DC/BLDC Servo, 2-4 Axes 　 SB series : Control Module with Drive + Motion Controller ( for more information) 　 SB 1381   SB1381 Stand-alone, Drive+Controller, AC/DC/BLDC motor,  1 Axis, 7.5A Phase Current 　 　 SB 1292    　 SB1292 Stand-alone, Drive+Controller, AC/DC/BLDC motor,  2 Axes, 7.5A Phase Current 　 SB 1391   SB1391 Stand-alone, Drive+Controller, AC/DC/BLDC motor,  1 Axis, 5-15A Phase Current 　 Unilite   Unilite Stand-alone, Drive+Controller, DC servo motor,  1-2 Axes, 3A Phase Current